|
Freud C400 6-1/8-by-11/16-by-1/8-Inch Jointer Knives, 3-Pack |  | Brand: Freud
Category: Home Improvement
List Price: $35.42
Buy New: $18.71
as of 3/14/2010 13:48 UTC details
You Save: $16.71 (47%)
New (4) from $18.71
Seller: RouterBitWorld
Rating:  16 reviews
Sales Rank: 1283
Media: Tools & Hardware
Number Of Items: 3
Shipping Weight (lbs): 0.3
Dimensions (in): 6.3 x 0.9 x 0.5
MPN: C400
Model: C400
UPC: 008925660293
EAN: 0008925660293
ASIN: B00004RK6T
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Produces the smoothest cut | | • | Precision-machined for best results; pre-ground to a razor sharp edge | | • | Made from premium high-speed steel stock | | • | 3-pack of jointer knives | | • | Manufacturer's limited lifetime warranty |
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Amazon.com Product Description
The Freud Difference
Freud manufactures some of the most innovative, technologically advanced woodworking tools and accessories in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry. About these Replacement Knives
These Freud 6-1/8-inch replacement jointer knives are designed for use with the Ryobi AP10. They're pre-ground to a razor sharp edge in order to produce the smoothest cut possible. Precision-machined for best results, these knives are made from premium high-speed steel stock for a keen edge and long life. Key Tech Specs:
- 6-1/8 inches long
- 11/16-inch wide
- 1/8-inch thick
Warranty
This 3-pack of knives is covered by Freud's limited lifetime warranty.
|
| Customer Reviews:
Showing reviews 1-5 of 16
 Blades are ok February 5, 2010
B. Raymond (Austin TX)
I used these on my Ridgid JP0610 Jointer and they are at least as good as the blades that came with the unit. They already have little nicks in them, which is about what the stock blades did too. For the price they are very reasonable. If you want basically the same blades that came with your Ridgid, these work fine. They are not an upgrade, but may very well be the most cost effective solution. I bought a couple sets to make sure I don't run out again. As always they were shipped promptly and arrived on time and un damaged.
 Spend the money and get a good set! January 30, 2010
Monte L. Mcculloch
Bought these knive to replace the ones in my ridgid jointer! right out of the box they had a curl on them and needed to be honed! Should have sent them back but I needed them immediately. After only an hour or so of use they are completely curled over and so dull they chatter the wood. Very dissapointed in the product, spend the money and get a good set if you plan on using them at all!
 replaces ridgid blades October 4, 2009
Dominic (Harrison twp, MI)
1 out of 1 found this review helpful
Needed replacements for my ridgid jointer. These look identical and are exactly the same dementions. They are razor sharp and mount in there perfectly. Have not had a chance to try them yet but I have Freud blades in my table saw and router and they hold up great so I would expect the same from these. I have learned not to be too hard on jointer blades. Don't cut deeper than you have to and check your blades often. I didn't bother to check them till I was getting bad cuts and was amazed at how badly I had worn them down.
Fits the Rigid 6 1/8" jointer November 30, 2008
furniture maker (VA)
1 out of 1 found this review helpful
Drop in replacement of the factory knives that come with the Rigid 6 1/8 Jointer and good quality as expected from Freud.
Blades also fit in 6 1/8 inch jointer. November 9, 2008
Stephen Eng (Brooklyn, New York United States)
1 out of 1 found this review helpful
A friend of mine brought over a Sears 6 1/8 jointer he found in the garbage. It was covered in rust and the motor was missing. I decided to rebuild it at almost the cost of a new one. Sears wanted $36.99 for the blades plus shipping and tax. I decided to take a chance on these blades for $17.11 from Amazon. The blades are a perfect match to the old blades. If you have a Sears 6 1/8 Jointer Model#113206931, these blades will fit, but always measure the size of the old blades to be sure. Since Sears made several different models of jointers.
Showing reviews 1-5 of 16
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. WoodworkingShoppe.com
 | |
